|
General characteristics
Geomembrane is manufactured only from technically selected, high quality grades of HDPE-PP-LDPE under carefully controlled proven extrusion technology. In
addition, the Geomembrane is stabilised against UV radiation and supplied in widths of 5,1
and 8,0 metres. Geomembranes withstand the effects of chemicals, acid,
alkaline and salt solutions. The Geomembrane is not affected by mildew and micro-organisims. Furthermore, the Geomembrane cannot be penetrated by the roots from surrounding vegetation. The quality of drinking water is not affected by the use of
Geomembrane.
Quality Assurance
The geomembrane is manufactured in accordance with the company
ISO 9001 quality system procedures. An internal Geomembrane manufacturing quality assurance system was designed to specifically control the quality of the
product. The principles of the systematic regular quality assurance control is the BAM Berlin
method. All tests on Geomembrane are in
accordance with this procedure, including the frequency of testing. The supervision of the Geomembrane quality is subject to testing at independent institutes - TGM
WIEN, MPA DARMSTADT and ITC Zlín. The Geomembrane is certified for use in many countries throughout the
world.
Applications
-
bottom seals for communal landfills
-
capping of communal landfills
-
cesspools / tanks used to retain industrial and agriculture waste waters
-
insulation of reserve tanks foundations
-
insulation of car parks, petrol stations, motorways to prevent groundwater contamination
-
protection against leakage of water from lakes, seas, river slopes, river canals, drinking water tanks and utility water tanks
-
irrigation canals, weir and dam insulation
-
insulation of tunnels, bridges, viaducts
etc.
-
insulation for construction industry
Handling and Transportation Procedures
To ensure that the rolls of Geomembrane are not damaged during the
loading and unloading of vehicles, special care and attention must be taken during these
operations. Transportation of Geomembrane must be undertaken by professional companies who operate clean vehicles with sufficient load carrying
capacity.Geomembrane can be transported in a 3 layer
pyramid formation - 4 rolls in the bottom layer, 3 rolls in the middle and 2 rolls on the top. During transportation of Geomembrane rolls must be secured to the vehicle through the use of wedges and
belts. To unload rolls of Geomembrane safely it is necessary to use a suitable material
handling vehicle crane or forklift truck. To prevent damage to the rolls of
Geomembrane during the unloading operation, it is recommended to use textile belts with sufficient carrying
capacity. To prevent damage to the rolls of Geomembrane when being stored on the construction
site, a flat surface free of sharp objects (stones, branches etc.) is
necessary. To protect the Geomembrane, a base layer of geotextile geoNETEX S 1200 must be used. Rolls of Geomembrane can be stored on the construction site without damage in a 3 layer
formation, provided they are on a flat surface and protected with a base layer of geotextile geoNETEX S 1200. To prevent movement during storage on the construction
site, the rolls of Geomembrane must be properly secured using wedges.
Sales manager:
Mgr. Vágner Michal
top
|
|
